Cue sensorCUE Bedienungsanleitung PDF herunterladen (Seite 8)

5. Programming

(REMARK: the following text is relevant for sensorCUE firmware versions 20 and higher)

The standard command for reading out the data from sensorCUE is:

RemoteVariableGet (reference as Word, paneladdress As Byte) as Word

The reference allows to identify which measured value should be read while the paneladdress

identifies which sensorCUE unit is to answer.

The following reference values are supported:

• Reference = 0 sensorCUE firmware version

• Reference = 1 temperature value

• Reference = 2 lighting level value

Reference = 0 sensorCUE firmware version

Response value is in range 0 - 65535

The latest firmware version is 20.

Example: Fw = RemoteVariableGet (0, 34)

This command has assigned the firmware version number of sensorCUE-W (with the serial number

CS0265.0134) to the Fw variable.

Reference = 1 temperature value

The temperature is measured using 12bit resolution sensor. It covers the measuring range from

+125 °C to -55 °C

The temperature value is encoded into a 16-bit response value according to the following rules:

Response value bit weight

BIT 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

S S S S S 2

-1

-2

-3

-4

S means sign.

S=0 for positive and S=1 for negative values.

User Manual sensorCUE

www.cuesystem.com

Page 8 of 14

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Cue sensorCUE Bedienungsanleitung Seite 8